Yamaha CR-1040 Receiver

For your consideration, we have a pristine, vintage 1980 Yamaha CR-1040 receiver that we received from the original owner. This is the second of two units that we took in. The receiver has been fully tested and gone over.  All potentiometers and switches have been cleaned and then treated with Deoxit D5 and F5 respectively. We adjusted the DC offset and adjusted the power meter to factory specifications. This unit is in perfect working order and Excellent physical condition with few if any blemishes. All inputs including the tuner have been tested and are in good working order. The phono section sounds very good and has a selector for Moving Magnet and Moving Coil Cartridges. It's a beautiful looking receiver. Comes with original owners manual.

We take our packing process seriously, and the Receiver will be carefully packed in a heavy duty box and surrounded on all sides with several inches of polyethylene foam. Water activated, fiber reinforced tape will be used on all seams.

Specifications

Tuning range: FM, MW

Power output: 80 watts per channel into 8Ω (stereo)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.02%

Damping factor: 40

Input sensitivity: 0.1mV (MC), 2.5mV (MM), 120mV (line)

Signal to noise ratio: 86dB (MC), 95dB (MM), 100dB (line)

Output: 120mV (line)

Speaker load impedance: 4Ω (minimum)

Semiconductors: 53 x transistors, 14 x IC, 4 x FET, 18 x diodes, 6 x zener diodes, 8 x LED

Dimensions: 520 x 151 x 386mm

Weight: 16.5kg