For sale is the well reviewed A3.5 Integrated amplifier. The unit is in excellent working condition and very good physical condition. The faceplate is in excellent condition, the top has a few light scratches, while the rest of the sides and bottom are very clean. Included with the A3.5 is the owners manual, remote and original box, which shows some wear but is functional. The unit will be double boxed when shipped.
Specs:
Output : Power : 150 Watts per channel into 8 Ohms (22dBW), 240 Watts per channel into 4 Ohms Voltage, RMS : 34 Volts 20Hz to 20kHz Voltage, Peak-to-peak : 96 Volts Current peak-to-peak : 50 Amps Damping factor : 142 Output devices per channel : 4 Pre-out impedance : 50 Ohms Line inputs : Total harmonic distortion + noise, < 0.01%, 20Hz to 20kHz Signal / noise ratio : > 100dB ‘A’-weighted Input sensitivity for 147 Watts into 8 Ohms : 282mV Input impedance : 100k Ohms Overload margin : 26dB Channel separation : > 82dB typical Frequency response : 20Hz to 20kHz, +0, -0.1dB Home Theatre direct input sensitivity : 30dB gain (31.5 times) nominal Inputs : 5 pairs line level RCA connectors, 1 pair direct power amplifier input RCA connectors for Home Theatre use (not controlled by volume adjustment) Outputs : 2 amplifier channels via 1 pair binding posts per channel 1 pair RCA audio outputs controlled by the volume, 1 pair RCA tape record fixed line level output. Power requirement : 100 / 115 / 230Volts AC 50 / 60Hz (factory pre-set), 450 Watts maximum into 8 Ohms, 36 Watts idle Weight : 9.7 kg, 21.4 lbs unit only, unboxed 14.4 kg, 31.8 lbs in shipping carton Dimensions : 440 mm, 17.3 inches wide 100 mm, 3.9 inches high including feet 395 mm, 15.6 inches deep including terminals Standard accessories : IEC type mains lead (10-Amp type), Remote control handset (A3.5 type, universal), 2 batteries size LR03 or AAA, manganese alkaline type 3.5mm stereo jack plug to two RCA plug audio lead (1metre) for accessory connection (iPod, MP3 etc.)