Krell Theater Amplifier Standard 5 Channel Amplifier
For your consideration, we have a one owner Dan D’agostino designed Krell Theater Amplifier Standard 5 Channel Amplifier. This powerful amp is rated at 200 Watts per channel and it is in perfect working order. this versatile amp can be bridged to three channels if more power is desired. Physically, the unit is in very good condition, with some blemishes, including some light marks on the front and top of the unit. There are no dents or deep scratches, and the unit presents itself very well. Please see the many pictures in the listing for further details.
On our bench, we opened the amp where it passed our visual inspection. Capacitors looked good with no bulging or signs of leakage. Resistors showed no signs of cracking or overheating, and the transistors showed no signs of damage. We then tested the amp using our Sencore PA81 amplifier analyzer. We ran a 1k sine wave into the amp, and on our scope each channel showed a clean wave. The amp easily tested clean at 200 watts per channel. With the amp testing as it should, we then ran the unit in our house system for about a week testing all five channels. The amp had plenty of power, and did a great job driving our B&W 801's.
The amp will ship with its original C19, 20 Amp power cord as seen in the pictures.
We don't have the original box for this unit, but we take packaging and shipping seriously. We spare no expense and use heavy duty boxes, several inches of polyethylene foam on all sides of the unit, and use water activated, fiber reinforced tape on all seams. This amp weighs 100 pounds, and with packing, will be around 115 pounds total. We will use cardboard edging, to reinforce the box, and then strap it as well for added protection during shipping.
Specifications
Theater Amplifier Standard
FREQUENCY 20 Hz to 20 kHz +0 dB, -0.09 dB
RESPONSE 0.25 Hz to 170 kHz +0 dB, -3 dB
SIGNALTO NOISE
RATIO
“A” WEIGHTED >110 dB
TOTAL HARMONIC 1 kHz < 0.03%
DISTORTION (THD) 20 kHz < 0.20%
GAIN 25.8 dB
INPUT IMPEDANCE 100 kOhms
INPUT SENSITIVITY 2.05 Vrms
OUTPUT VOLTAGE Peak to Peak 113 V
RMS 40 V
OUTPUT POWER
EACH CHANNEL 8 Ohms 200 W
4 Ohms 400 W
BRIDGED 8 Ohms 800 W
POWER Standby 60 W
CONSUMPTION Idle 170 W
Max. 2500 W
INPUTS 5 single-ended via RCA connectors
5 balanced via XLR connectors
5 via DB-25 connector
OUTPUTS 5 amplifier channels via five-way binding posts
REMOTE CONNECTORS 12 VDC Out (12 V trigger) via a 3.5 mm connector
12 VDC In (12 V trigger) via a 3.5 mm connector
DIMENSIONS 17.3w x 9.8h x 17.0d in.
43.8w x 24.8h x 43.2d cm
WEIGHT
SHIPPING 110 lb., 50 kg
UNIT ONLY 100 lb., 45.5 kg