Fisher X-202-C Integrated Tube Amplifier

For sale, we have a Fisher X-202-C Integrated Tube Amplifier in good working order. The previous owner recapped the unit. The original power supply capacitor cans were saved and glued on over the modern electrolytic caps that were installed under them. The original faulty power/volume control switch was removed and replaced with an Alps volume control only attenuator, so now there is no power switch on the unit. We have been using a separate soft start power box to turn the unit on and off.  We checked over the amp, and cleaned all the switches and pots using the appropriate Deoxit. All tubes were pulled and tested on our Amplitrex AT-100 tube tester, and all tested strong. This is the first Fisher X-202-C that we have had in our shop, and we have really enjoyed it. It's a great sounding piece, with a superb phono section.  We ran it on our bench for two days, and then moved it into our house system area, and ran it for about two weeks. It performed flawlessly. It's a remarkable sounding amp.

Physically the unit is in good condition. It shows its age, and has tarnishing and blemishes. However, the unit has no dents or deep scratches. All knobs are intact as well as their brass caps. Please see the many pictures in the listing for further details. 

We prefer to pull all the tubes prior to shipping. Each of the 10 tubes will be boxed and labeled with its location, so the new owner should have no problem installing them. We will provide a diagram and can walk the next owner through the process over the phone if need be. 

We don't have the original box for this unit, but we take packaging and shipping seriously. We spare no expense and use heavy duty boxes, several inches of polyethylene foam on all sides of the unit, and use water activated, fiber reinforced tape on all seams.