For your consideration, we have a fine example of the well regarded, Vincent Audio SV-236MK Integrated Hybrid Class A Stereo Amplifier. Weighing in at 45 pounds, this great sounding amp is in perfect working order. We obtained the amp from the original owner who upgraded his audio system twice since he purchased this unit, and it had been in a closet for a number of years. The SV-236MK was cleaned and checked over, and there were no signs of bulging capacitors, or burnt resistors or diodes. The inside looked as new, and had not been opened since it was built at the factory. The Tubes were pulled and tested well on our Amplitrex AT-1000 Tube tester. (We can install new tubes at an additional charge, but we did not feel they were needed) All pots and switches were cleaned and then treated with the appropriate Deoxit. We ran the unit on our bench for a day, and then in our house system for a week, where we enjoyed it immensely.
Physically the amp is in very good to excellent condition, and it presents itself extremely well. There are a couple of blemishes on the faceplate, and a light scratch in the top plate. These blemishes are viewable in the pictures in the listing, along with an additional 22 pictures of the amp.
Included with the amp is the original remote, with fresh batteries, power cord, and a printed copy of the owners manual in english. (The owners manual is available for free online)
We don't have the original box for this unit, but we take packaging and shipping seriously. We spare no expense and use heavy duty boxes, several inches of polyethylene foam on all sides of the unit, and use water activated, fiber reinforced tape on all seams.
Specifications, and Description:
Description: Tube and solid-state, remote-controlled, two-channel integrated amplifier with six line-level inputs. Tube complement: three 12AX7. Maximum output power outputs: 150Wpc class-AB into 8 ohms (10Wpc class-A), 250Wpc class-AB into 4 ohms. Frequency response: 20Hz–50kHz, ±0.5dB. Input sensitivity: 200mV. Input impedance: 47k ohms. THD: <0.1% (1kHz at 1W). Signal/noise ratio: 80dB (no reference level given). Power consumption: not specified.
Dimensions: 16.8" (430mm) W by 5.9" (150mm) H by 17" (435mm) D. Weight: 45 lbs (20.4kg).