For sale, we have a fine example of the Rotel RMB-1075 Five Channel Amplifier. Rated at 120 Watts per channel at 8 Ohms, the amplifier is in perfect working order. Physically, the unit is in excellent condition, with only minor blemishes. There are no dents or deep scratches, as the amp was well cared for.
On our bench, we opened the amp where it passed our visual inspection. Capacitors looked good with no bulging or signs of leakage. Resistors showed no signs of cracking or overheating, and the transistors showed no signs of damage. We then tested the amp using our Sencore PA81 amplifier analyzer. We ran a 1k sine wave into the amp, and on our scope each channel showed a clean wave. The amp easily tested clean at 100 watts per channel. With the amp testing as it should, we then ran the unit in our house system for about a week testing all five channels. It's a great sounding, amp,. We have had quite a few Rotel amps come through our shop, and we love this era of production.
The amp will ship with a power cord, and a printed copy of the owners manual in english. See pictures for further details on the physical condition of the RMB-1075
We don't have the original box for this unit, but we take packaging and shipping seriously. We spare no expense and use heavy duty boxes, several inches of polyethylene foam on all sides of the unit, and use water activated, fiber reinforced tape on all seams.
From Rotel:
"This multi-channel power amplifier delivers 120 watts (all channels driven), thanks to a power supply composed of a generous 1,500 VA toroidal transformer and eight 10,000 µf British-made Slit Foil capacitors. 20 output devices, each of which is rated for 130 watts and 15 amperes of current capability, make full use of the supply's potential.
The RMB-1075 's generous headroom and state of the art signal-to-noise measurements ensure unsullied reproduction of the most dynamic as well as the most delicate sonic nuances.
Complete with gold plated RCA and DB-25 input connectors, the RMB-1075 is ideally suited for either home theater applications or bi-amped systems optimized for music reproduction. Separate 12 volt "trigger " input and output jacks make this amplifier well suited for fully integrated systems with total remote control capability."
Specifications:
Power Configurations: 5 x 120 watts
Watts/Channel: 120 watts
all channels driven, unbridged,
8 ohm load, 20 to 20k Hz,
0.06% THD
THD (20-20,000Hz)
cont. rated power 0.03%, maximum
one-half rated power 0.03%, maximum
one watt per channel 0.05%, maximum
IM Distortion (at rated power, 60Hz:7kHz = 4:1). 0.03%, maximum
Damping Factor (8 ohms). 180
Input Sens. / Impedance 1.0V / 27 kohms
Frequency Response 15-100kHz (=0.5, -3dB)
S/N Ratio (IHF A) 115dB
Power Consumption 800 watts
Dimensions (W x H x D) 433 x 189 x 380 mm 17 1/8 x 7 1/2 x 15"
Front Panel Height 176 mm, 6.9"
Weight (net) 17 kg / 37.4 lbs