Here we have a fine looking vintage 1980 Yamaha CR-1040 receiver that we received from the original owner. The unit has been fully tested and gone over. All potentiometers and switches have been cleaned and then treated with Deoxit D5 and F5 respectively. We adjusted the DC offset and did a power meter adjustment to factory specifications. This unit is in perfect working order and very good physical condition. There are a few points to note on the cabinet, and they can be seen close up in the attached photos. Includes original owner's manual. All inputs including the tuner have been tested and are in good working order. The phono section sounds very good and has a selector for Moving Magnet and Moving Coil Cartridges. It's a beautiful looking receiver. Comes with original owners manual.
Shipping to the lower 48 US is included in the purchase price. We take our packing process seriously, and the Receiver will be carefully packed in a heavy duty box and surrounded on all sides with several inches of polystyrene foam. Water activated, fiber reinforced tape will be used on all seams.
Tuning range: FM, MW
Power output: 80 watts per channel into 8Ω (stereo)
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.02%
Damping factor: 40
Input sensitivity: 0.1mV (MC), 2.5mV (MM), 120mV (line)
Signal to noise ratio: 86dB (MC), 95dB (MM), 100dB (line)
Output: 120mV (line)
Speaker load impedance: 4Ω (minimum)
Semiconductors: 53 x transistors, 14 x IC, 4 x FET, 18 x diodes, 6 x zener diodes, 8 x LED
Dimensions: 520 x 151 x 386mm